NV- NiteSite Viper

Product detailed description

The NiteSite Viper consists of a module with illuminator and display, a camera mounted on the eyepiece of the riflescope with a rubber adapter and a battery. The principle of operation of the device is very sophisticated and adapted to hunting, its main advantage is that the image transmission to the display is very smooth and there is no image chopping as in some other digital night vision devices. Thanks to the powerful 850nm wavelength IR LED, the NiteSite Viper can be used in complete darkness and up to 100 metres away. Since the NiteSite Viper works on the principle of a camera capturing the image in a rifle scope, there is no need to re-shoot anything.

The NiteSite Viper can be mounted on any caliber, however, you must use the correct recoil-absorbing scope mounting clip.

With NiteSite Viper, you're less than 60 seconds away from night vision even in total darkness - the time it takes to assemble the device and get it ready for operation. Once mounted on the riflescope, you can look forward to up to 7.5 hours of operation (depending on illumination intensity, 5 hours at maximum illumination power). A great advantage is also the possibility to connect a recorder and record the course of the hunt. The body of the device is made of hardened plastic and is very durable, even against water.

How to mount the device on the rifle scope:

1. Put the rubber adapter on the eyepiece of the rifle scope.
2. Slide the camera module into the rubber adapter.
3. Attach the module with LCD display and illuminator to the socket on the rifle scope tube (sockets for 1" and 30 mm available). The screen mounting sleeve can remain clamped to the riflescope tube permanently for repeated faster installation.
4. Fasten the source to the stock with Velcro.
5. Connect all modules - the camera with display and the camera with battery - together with cables.
6. Take a picture, or sharpen your rifle scope.

Package contents:

• Camera module
• Module with LCD display and IR illumination
• Mounting the display on the 25.4mm (1") rifle scope tube
• Mounting of the dipole on the tube of the 30mm rifle scope
• 2 pieces of rubber adapters for the eyepiece of the rifle scope
• Li-Ion battery
• Li-Ion battery charger 220V
• Transport case
• Cable to connect the camera module and display
• Power cable
• Foils for blackout 5 pcs