INPRODUCTS Tent and Backpack Impregnation 200 ml

Product detailed description

INPRODUCTS - Impregnation for tents and awnings

SprejINPRODUCTS creates a thin film of silicon nanoparticles that protects tents, backpacks, awnings, umbrellas and other gear from getting wet and dirty while protecting their color from fading.

What is INPRODUCTS - impregnation for tents and awnings used for?

Prevents dirt adhesion
The solution forms a protective silicon layer on the surface of the material, which repels water and dirt and prevents fabric destruction. The impregnation also prevents the formation of unsightly stains.

Prevents mould and musty odours
The product will prevent the growth of moulds that damage equipment and health. Even after rain, the tent can be packed away in minutes. Thanks to the water-repellent layer, there is no need to wait for the fabric to dry - simply shake off the drops.

Colour and odour free
Unlike conventional impregnations containing chemicals, INPRODUCTS is based on water. As a result, the spray is colourless, odourless, not harmful to health and can be used even in confined spaces.

Preserves the breathability of the material
INPRODUCTS impregnation preserves the breathability of the fabric. Your tent will be protected against moisture while remaining comfortable to stay inside.

Protects against UV radiation
A layer of nanoparticles protects the fabric of the tent and backpack from sun damage. Outdoor equipment will last significantly longer than with conventional impregnations.

With INPRODUCTS impregnation you will protect:
? textile membranes (Gore-Tex, Gelanots, SympaTex),
? natural leather,
? synthetic fibres (nylon, polyester),
? a combination of the above materials.

How to use the spray?
Apply INPRODUCTS on cleaned, dry fabric. Shake thoroughly before use.

1. Apply the solution in a continuous layer from a distance of 10 to 20 cm. Spread the remaining drops of the solution into the material with a sponge.

2. After application, wait 24 hours for the protective silicon layer to form. If this time is not observed, the impregnation will not be fully functional. The process cannot be accelerated by a dryer or other heat source. During drying, leave the treated item in a ventilated area out of direct sunlight.

Store the spray at temperatures between 3 and 30 °C. The solution will deteriorate if it falls below 3 °C and freezes.

Technical features:
Protection against water, dirt and salt for up to 3 months (depending on the intensity of use) or up to 10 washing cycles.
Consumption: 25 to 100 ml per 1 m2 - depending on the absorption properties of the material.
Shelf life: minimum 2 years from the date of manufacture.
Package contents: 200 ml, 400 ml and 5 l.

Ingredients:
Dispersion product of modified silicon nanoparticles in aqueous solution. INPRODUCTS products are safe for health and the environment.