INPRODUCTS Shoe Impregnation 200 ml

Product detailed description

INPRODUCTS - Impregnation for shoes

SprejINPRODUCTS creates a thin film of silicon nanoparticles that protects natural leather, textiles, Gore-Tex membranes and suede against wetting and soiling and helps dry the material up to 5 times faster in the event of extreme water pressure (e.g. by wading or crawling).

What is INPRODUCTS shoe impregnation used for?
Prevents dirt adhesion
The solution forms a protective silicon layer on the surface of the shoe, which repels water and dirt and prevents the material from being destroyed by salt sprinkles. The impregnation also prevents the formation of unsightly stains.

Colour and odour free
While conventional impregnations contain various chemicals, INPRODUCTS is based on water. As a result, the spray is colourless and odourless, not harmful to health and can be used safely even in confined spaces.

Preserves the breathability of the material
INPRODUCTS impregnation restores breathability and properties of membrane fabrics (Gore-Tex and others). Your footwear will be protected against moisture while remaining breathable.

Withstands intensive cleaning
The silicon nanoparticle layer allows the fabric of the shoes to be cleaned of salt and sweat during washing. After drying, the function of the nanoparticles is restored. The impregnation lasts up to 10 washing cycles with water and up to 5 cycles with washing powder.

With INPRODUCTS impregnation you will protect:
? ordinary textile footwear (sneakers, canvas shoes),
? shoes made of natural leather,
? suede shoes,
? sports and membrane footwear (boots, soccer shoes, trainers).

How to use the spray?
Apply INPRODUCTS on cleaned, dry fabric. Shake the spray thoroughly before use.

1. Apply the solution in a continuous layer from a distance of 10 to 20 cm. After application, always sponge any remaining drops of solution into the material.

2. After application, wait 24 hours - a protective silicon layer will form on the surface. If this time is not observed, the impregnation will not work 100%. The process cannot be accelerated by a dryer or other heat source. During drying, place the treated object in a ventilated area and preferably out of direct sunlight.

Store the solution container at temperatures between 3 and 30 °C. If the temperature drops below 3 °C and the solution freezes, it will deteriorate.

Technical features:
Preserves protection against water, dirt and salt for up to 3 months (depending on the intensity of shoe wear) or up to 10 wash cycles.
Consumption: 25 to 100 ml per 1 m2 - depending on the absorption properties of the material.
Shelf life: minimum 2 years from the date of manufacture.
Package contents: 200 ml, 400 ml and 5 l.

Ingredients:
Dispersion product of modified silicon nanoparticles in aqueous solution. INPRODUCTS products are safe for health and the aquatic environment.